What is the machine called that bends metal?
What is the machine called that bends metal? Shaping metal without breaking it requires precision—and the right machine. The machine used to bend metal is called a press brake. It applies force through a punch and die to create precise bends in sheet metal. At Prime, we use CNC press brakes to create accurate, repeatable […]
What is the machine that cuts metal with water?
What is the machine that cuts metal with water? Need to cut metal with precision—without heat, distortion, or burning the edges? The machine that cuts metal with water is called a waterjet cutter. It uses a high-pressure stream of water, often mixed with abrasive particles, to slice through metal with extreme accuracy. At Prime, we […]
How to attach Snap fasteners?
How to attach snap fasteners? Snap fasteners are convenient—but if they’re misaligned or loose, they’ll fail quickly. To attach snap fasteners, punch a hole in your material, align the snap components (cap, socket, stud, and post), and secure them using a snap tool or press. At Prime, we attach snap fasteners to tool covers, removable […]
What is an open ring snap?
What is an open ring snap? Looking for a low-profile, flexible fastener that stays secure yet opens easily? An open ring snap is a type of snap fastener that uses a metal ring with an open center to create a light, flexible grip—ideal for clothing, covers, and light-duty panels. At Prime, we apply open ring […]
How do you use snap jaws?
How do you use snap jaws? Struggling to install or remove snap fittings? You might need snap jaws—the right way. Snap jaws are used with pliers or crimp tools to install or remove snap rings, clips, and fasteners. Choose the correct jaw size, align it with the part, and squeeze or spread as needed. At […]
How do you use a metal banding tool?
How do you use a metal banding tool? Securing heavy loads with loose or uneven straps can lead to shipping damage—or serious injury. To use a metal banding tool, wrap the band around your item, feed it into the tensioner, tighten, apply a seal, and crimp it in place using a sealer or band-it tool. […]
How do you use a metal screw extractor?
How do you use a metal screw extractor? Stripped or broken screws in metal parts can halt your whole assembly process. To use a metal screw extractor, drill a guide hole into the damaged screw, insert the extractor, and turn it counterclockwise to remove the screw. At Prime, we use screw extractors during metal assembly […]
How do you use a metal snap?
How do you use a metal snap? Installing metal snaps seems easy—until they misalign or fall off after one use. To use a metal snap, you need to align the cap and socket on one side, the stud and post on the other, and press them together using a snap tool or press. At Prime, […]
How do you use a metal nibbler?
How do you use a metal nibbler? Cutting curves or tight corners in sheet metal? A nibbler might be your best tool. To use a metal nibbler, guide the cutting head along the marked line while applying steady forward pressure. The tool punches small bits out of the metal, allowing for precise and clean cuts. […]
What is the burring process in sheet metal?
What is the burring process in sheet metal? Sheet metal parts often need more than cutting—they need reinforced edges too. The burring process in sheet metal involves creating a raised edge or collar around a hole to increase strength or prepare it for fastening. At Prime, we use burring to improve part rigidity, prevent cracking, […]
